all

Flat Faced Gate Cutters Precision-Ground Flat Face cutting surface with deep-sculpted design to reduce hand pressure required for easy use Smooth...

Brass mould tools with tough ABS plastic or wood handles will protect your expensive moulds and parts Excellent for removing frozen sprues in inje...

DME Compatible male thread mould plugs High quality brass construction mould plugs For coupling with regular quick connect couplers. Series Th...

DME compatible quick release water connector couplings Flow-through or Valved shut-off design High quality brass construction water connector Stai...

Nozzle Bands - Sealed Brass Mica insulated sealed brass bands High wattage/cm2 Twin, low-profile clamp bolts Stainless braided leads 500mm or 1m S...

Flange Bolt Nozzle Band Premium quality construction 240V heater 1m fibreglass leads or 1m stainless Positive clamps action prevents cold spots Hi...

DME Compatible extended male thread mould plugs High quality brass construction mould plugs For coupling with regular quick connect couplers.

Hardened Chrome Steel General Purpose 38mm Nozzle tips For general-purpose applications, a good, all-round flow path with smooth internal flow char...

Keiba Angled Gate Cutters for hard-to-reach sprues 45 and 90 degree cutters High quality steel, lap jointed with coil spring and flat face Extra s...

High Quality Brass Hose Fittings Male BSP Thread to Hose Barb

High quality wood handle brass hand brushes.  Ideal for cleaning moulds, barrels, screwtips, screws, etc. Soft copper brush material will not dama...

High-quality brass mould tools. Ideal for cleaning frozen sprues and general mould maintenance Tough, sculpted handles with soft grip Sturdy const...

Hardened Chrome Steel General Purpose Extended Nozzle tips For general-purpose applications, a good, all-round flow path with smooth internal flow ...

Economy sprue cutters Flat faced for flush cutting. Precise, clean cut. Lower price. FF5A: Ideal for soft plastics. FF6A: Medium cutter for more...

Replacement seals for DME water connectors. Viton and Buna-m available

Materials/Construction: Band and Housing: AISI 304 Stainless Steel. Screw: Yellow chromed Carbon Steel.  Band 9mm 12mm Width W 9 12 Thick...

Leaf Type Thermocouple Equipped with a 25 x 10mm wafer thin leaf tip for use in limited space situations. Can be slipped under a heater band or us...

Mould Shield (Green) A 400ml aerosol coloured green. Unique anti-rust spray for easy dispersion onto moulds for storage or overnighting. Drives out...

PVC/Polyurethane blend core with high tensile strength yarn reinforcement and premium grade PVC cover. 15 times more flex life than rubber. Resist...

Male to Male BSP thread. Galvanised construction

Hardened Chrome Steel Nylon Nozzle tips 38, 70 or 95mm length (including thread) 48/52 rc Hardened chrome vanadium tungsten tool steel 7/8"-14 thr...

Remove frozen sprues, clean out runners, hundreds of other uses! Steel handle never mushrooms or wears out. 8mm Diameter replaceable brass tips, m...

Plastic Cutting Pliers - Round Back Precision-Ground slightly rounded cutting surface with deep-sculpted design to reduce hand pressure required fo...

Euro Series compatible water couplers and fittings Valved shut-off or unvalved flow-through design

Economical alternative: Our most economically priced mould release. A 5% concentration of silicone with a less expensive propellant blend than is u...

Euro Series compatible male thread mould plugs High quality brass construction mould plugs For coupling with regular quick connect couplers. ...

DME Compatible female thread mould plugs High quality brass construction mould plugs For coupling with regular quick connect couplers.

Replacement springs for our range of cutters. High quality springs provide long life and smooth action. SPR4 for FF4-FF6, S4-S6, GA5, GA7 SPR7 for...

DME compatible quick release water connector couplings Flow-through or Valved shut-off design High quality brass construction water connector Stai...

A quick, economical and better way to clean injection machines and extruder screws and barrels. Knitted from flattened 100% pure soft copper wire 0...

Flange Lock Bands 1 metre fibreglass leads exit either side of gap Flange Lock-up provides firm grip and high heat transfer. Smooth I.D. reduces...

Mould Shield (Clear) New advanced formula, colourless Provides even dispersion and speedier, more uniform application. Does not run or penetrate e...

Replacement Blades Replacement blades for our range of trim knives Available in packs of 3 or 50 blades

Forged Mould clamp sets Including: Clamp, Adjusting Screw, Forged washer and (optional) bolt Rust and corrosion resistant, black oxide or zinc fin...

Threaded (Nozzle Type) Thermocouple. 1/4" - 28, 6mm or 8mm adapter Threads: 1/4"-28 UNF 6mm 8mm Standard nozzles: Drill and tap 1/4" (6.4 mm) dee...

Euro Series compatible male thread mould plugs High quality brass construction mould plugs For coupling with regular quick connect couplers.

Ideal for applications where stains, coatings or deposits of oil, grease or dirt have to be efficiently and quickly removed. It is a product of low...

Multi-purpose neoprene BUNA-N tube, 200 psi, with neoprene cover. Smooth outer and inner surfaces, grease and oil resistant. Good for water temper...

Hand Driven Brass Brushes Ideal for cleaning small bore or drilled holes Quickly and safely removes plastic, rust or dirt Hand or power driven Mix...

Friction Fit Bands Applications: Use where recessed sprue bushings and similar obstructions create limited space for nozzle heater band. These band...

Easy slide silicone release agent is intended for injection and compression moulding of rubber and plastics. It prevents sticking of the moulded pr...

Made from tough stainless steel bristles for cleaning the barrel bore. These barrel brushes are indispensable items for any mould shop. 10mm femal...

Non-Silicone Release AgentAn extremely efficient release agent which leaves no residue or film on moulded work. It is ideal for use where subsequen...

  High Quality Extruded Aluminium Manifolds Pressure tested quality extruded aluminium Red or Blue anodised finish 3/4", 1" and 1 1/2" BSP Inlet m...

Zinc Stearate - MR568A reliable dry powder release available in an aerosol can.  Sprays a visible zinc stearate powder so you can see what you are ...

Yellow or Black Multiform High Temperature Hose Multipurpose hose suitable to convey hot water & oil and aggressive chemicals. Internal: Black...

High Quality Extruded Aluminium Manifolds Pressure tested Red or Blue Anodised finish heavy gauge extruded aluminium 3/4", 1" and 1 1/2" BSP Inle...

MR416N Mould Cleaner plus Degreaser Non-Flammable Non Flammable heavy duty solvent to remove tough build-up from metals and other surfaces. Quickly...