New products

PU HOSE Polyurethane hose with copper coated steel spiral Light and flexible, resisting kinking and crushing Diameters 38, 40, 45, 51, 60, 70, 76m...

Ideal for use with our full range of convoluted loader hoses. A single clamp on each end provides adequate holding power.

The TM-W series of water heaters are used to heat the mould and maintain set temperature.High temperature water from the mould is cooled by direct ...

Introduction; The TCM series of volumetric dosers are suitable for auto-proportional mixing of new material, regrind, master batch and additives. A...

Material suction box to fit at the base of our THD dryers.

Cast base with removable magnet prevent metal contamination of the press.

Rugged floor stand converts hopper-mounted dryer into portable unit that can be mounted beside the press.

Effective, low-cost solution for plastic material drying. Efficient drying by hot air recirculation.  These dryers can be directly mounted on the m...

Machine Mounted Hopper Loader TAL300C TAL300 series uses a high-speed motor in a lightweight, compact unit, with superior suction power. Easy insta...

TG Series low-speed granulators are suitable for by-the-press recycling of sprues. Feature easy operation, excellent performance, low noise and dus...

Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at front to accept remova...

Van Dorn Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at ...

Toyo Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at front...

Toshiba Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Stubbe Nozzle Body   Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Stork Reed Nozzle Body   Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread ...

Sandretto Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at...

Oima Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fron...

Nissei Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fr...

Netstal Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Negri Bossi Removable Tip Nozzles Between 61mm-74mm Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands...

Negri Bossi Nozzle Bodies Up to 60mm thread Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8...

Metalmec Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Krauss Maffei Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female threa...

Klockner Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at ...

Kawaguchi Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at...

JSW Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at front...

Husky Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fro...

Haitian Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Fortune Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Ferromatik Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread a...

Fanuc Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fro...

Fahr Bucher Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread ...

Engel Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fro...

DK Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at front ...

Demag Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fro...

Cincinatti Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread a...

Chen Hsong Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread a...

Boy Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at front...

Borche Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fr...

Biraghi Nozzle Body for removable tips Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14...

Billion Nozzle Body for removable tips Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14...

Battenfeld Nozzle Body for removable tips Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"...

Arburg Nozzle Body for removable tips Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 ...

  Product class A ‚Äì DIN508. Hardness Class 10.

Premium quality machined T-Slot nuts for mould mounting. Product class A ‚ DIN508. Hardness Class 10.

Hex Nuts with Flange Product class A –DIN 6331 Hardness Class 10

Hex nuts with Whitworth thread.