all

END PLATE O-Ring

10/20 LT/MIN FLOW TUBE, LARGE

Van Dorn Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at ...

Unequal Y For use in air or water systems up to 60 degrees, up to 195psi.

Two Touch Fit Equal T For use in air or water systems up to 60 degrees, up to 195 Psi.

Two Touch FitMale Stud, Male Thread, BSP TaperFor use in air or water systems up to 60°C, up to 195psi

Ambersil Tufcut Cutting Fluid 400 ml Aerosol Instant ready-to-use metal cutting lubricant, for faster production and improved surface finish. A mus...

Toyo Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at front...

Toshiba Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

ECONOMY SNAP-OFF Blade extends from 10mm to 75mm. 17 position blade ratchet. 7 point snap-off blade.

TG Series low-speed granulators are suitable for by-the-press recycling of sprues. Feature easy operation, excellent performance, low noise and dus...

  Terminal boxes to mount connection sockets directly to your mould or machine. These boxes can be used for regular power AND thermocouple sockets...

Introduction; The TCM series of volumetric dosers are suitable for auto-proportional mixing of new material, regrind, master batch and additives. A...

T Male Run Male Thread. BSP Taper. Swivel.

T Male Centre Leg Male Thread. BSP. Parallel.

Stubbe Nozzle Body   Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Stem Y Reducer For use in air or water systems up to 60 degrees, up to 195psi.

Stem Y For use in air or water systems up to 60 degrees, up to 195psi.

Stem Elbow For use in air or water systems up to 60 degrees, up to 195psi.

RPL compatible RPL08/12 quick release couplings

RPL compatible male thread mould plugs High quality brass construction mould plugs For coupling with regular quick connect couplers.

RPL compatible RPL08/12 quick release couplings

RPL compatible RPL08/12 quick release couplings

RPL compatible RPL08/12 quick release couplings

Ideal for use with our full range of convoluted loader hoses. A single clamp on each end provides adequate holding power.

Silicone Anti-Stick FGFood Safe Silicone LubricantA high purity, high concentration silicone lubricant for applications where contact with potable ...

High power heaters - Coiled to your requirementsThese round-section coiled heaters include stainless steel braid sheath 1m leads. Operates in high...

Reducing Manifold Male Stud For use in air or water systems up to 60C, up to 195psi

Reducing Manifold For use in air or water systems up to 60C, up to 195psi

Reducer For use in air or water systems up to 60C, up to 195psi

Rectangular section Coil Heaters (4.2mm X 2.2mm) Flat section for minimal space requirement, improved contact & performance Operates up to 700...

A powerful, fast evaporating solvent cleaner/degreaser. Suitable for use in industrial, aviation, automotive, polymer processing, general engineeri...

Ambersil Penetrating Oil Penetration for seized parts An extreme low surface tension lubricant that wets out and penetrates deeply and quickly to a...

Single Jack Panels for standard and minature sized plugs. Standard AluminiumSize: 38mm squareMounting: 32mm knockouts with 2 latching screws Miniat...

Nissei Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at fr...

Netstal Type Thermocouple. Plug Insulated/Unground Junction 1 Metre Leads, J Type

Netstal Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Negri Bossi Type Thermocouple. 12mm OD Bayonet. 6/8mm dia probe 1m lead, Type J Standard- also available made to your requirements Insulated/Ungr...

Mir Type Thermocouple. 12mm OD Bayonet. 6/8mm dia probe 1m lead, Type J Standard- also available made to your requirements Insulated/Unground Junc...

Metalmec Nozzle Body Nozzle body with thread to suit your machine. 11/2" body diameter accepts standard heater bands and 7/8"-14 female thread at f...

Mega Magnets Round Manufactured from Neodymium Iron Boron (NdFeB) and are up to 20 times stronger than standard ferrite magnets. These magnets are ...

Medium duty, silicone mould release agent A general purpose release agent for all thermoplastics and many types of rubber Improved surface finish,...

Manual Flow ControllerElbow Male Thread, BSP Taper

Male Stud Y Male Thread, BSP Taper, Swivel For use in air or water systems up to 60C, up to 195psi

Male Stud ElbowMale Thread, BSP ParallelFor use in air or water systems up to 60°C, up to 195psi

Cast base with removable magnet prevent metal contamination of the press.

Ambersil Label Remover Spray NSF registered label and adhesive remover for use in the food and drinks industry. K3 registered.  Removes all types o...

Krauss Maffei Type Thermocouple. 21mm OD Bayonet. 10mm diameter probe 1m lead, Type J Standard- also available made to your requirements